10M Bandwidth Oscilloscope Low Noise Differential Probe for Electronic Engineers

Specification:
Origin: Mainland China
Oscilloscope Parts Accessories Type: Oscilloscope Parts
Single-end input voltage: - 10V to+10V
Differential input voltage: - 10V to+10V
Single-end input impedance: 2M
Differential input impedance: 4M
Output voltage: - 10V to+10V
Magnification: 1x/10x/100x
Bandwidth:
G=1-10M
G=10-10M
G=100-2M
Common mode rejection ratio:>80DB
Noise: 5nV/ 1KHz
Power supply: built-in rechargeable lithium battery
Charging interface: USB TYPEC
Battery life: about 5 hours
Operating temperature: 0 °C-40 °C
Working humidity: ≤ 90% RH
Power consumption: ≤ 0.2W
Volume: 115 * 50.5 * 21mm/4.5*1.9*0.8in

Note:
This product is specially designed for amplifying weak signals. For weak current, the noise is small, the accuracy is high, and the original signal is well recovered.
The oscilloscope is usually unable to measure small signals, and the instrument needs to be amplified before measurement.
It can also be used for industrial automation measurement and control because the sensor signal is very weak and needs to be amplified before output.
This product is not a high pressure probe. The high pressure probe is used for high pressure operation. For strong current, it is generally used to measure high voltage, and the accuracy requirement is not high.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.


Package Content:
1 x 10M Bandwidth Signal Amplifier
1 x 0.5m BNC straight cable
1 x BNC short-circuit cap