600L/H 8W Submersible Aquarium Circulating Fish Pond Water Fountain Pump

SM-038 600L/H 8W Submersible Aquarium Circulating Water Pump Ultra-quiet Landscape Fish Tank Pond Water Fountain Pump
Feature:
High-quality ABS plastic support, wear-resistant and corrosion-resistant, longer service life.
The bottom of the pump comes with 4 fixed suction cups and a 1.5m long wire that you can install on the left or right side of the aquarium.
The water pump is equipped with 2 nozzles: 8mm and 12mm, the water flow is 600L/H, and the maximum height can reach 1.2m. You can freely change the nozzle water flow. (Do not start the pump in the dehydration state, you can fill the water outlet before starting)
The water pump does not need a transformer and can be used after connecting to the power supply.
Pure copper motor, low resistance, energy saving, stable and very quiet operation, no need to worry about noise when using, providing you and your family with a comfortable and quiet sleeping environment.
High-performance stainless steel shaft, good shock resistance and wear resistance; ceramic rotor is quieter.
This submersible pump can be disassembled without tools, just drop the pump head and accessories into the water, clean the surface with a brush, and reassemble.
The submersible water pump is suitable for fresh and salt water and can generate water flow. It is very suitable for aquariums, drainage ditches, ecological pools, breeding ponds, landscape houses, gardens, various crafts, small fountains, etc.

Specification:
Main material: ABS
Size: 55x50x43mm/2.17x1.97x1.69in
Color: as shown
Power: 8W
Lift: up to about 1.2m/3.93ft
Flow: about 600L/H
Outlet hose connector size:
The outer diameter is 12mm/0.47in, the inner diameter is 10mm/0.39in, and the height is 24mm/0.94in
The outer diameter is 8mm/0.31in, the inner diameter is 6mm/0.24in, and the height is 21mm/0.83in
Power cord length: 1.5m/4.92ft
Uses: Wide range of use, can be used in aquariums, drainage ditches and ecological pools, breeding ponds, landscape rooms, gardens and various handicrafts, small fountains, etc.

The plug specifications and working information are as follows:
Plug Specification Voltage Frequency
EU 220-240V 50Hz
US/JP 110V 60Hz
UK 220-240V 50Hz

Note:
The pump must be completely immersed in water when it is working, and the machine will burn if there is no water on one side.
Please pay attention to cleaning the rotor shaft core regularly.
If there is a fault during use, please cut off the power supply as soon as possible, and repair it only after leaving the water.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Water Pump
1 x plug (with 1.5m cable)
2 x Nozzles