ARGB LED Light Strip 5V 3PIN ARGB Sync for 3x8PIN GPU/24PIN Motherboard

Specification:
Certification: CE
Origin: Mainland China
Type: Sync Motherboard Cable
Package: Yes
Name: ARGB luminous light panel soft cord
Model: AL200, AL300 (optional)
Material: silicone
Lamp beads: AL200: 56PCS, AL300: 44PCS
Voltage: 5V DC
Current: ≤0.7A±10%
Power: ≤3.5W±10%
Interface: 5V 3PIN*2+4PIN (5V 3-pin female header - plug into the motherboard's 5V ARGB divine light synchronization interface, 5V 3-pin male header - connected in series with other 5V ARGB products to light up the light together; insulating protective cap - the pin interface is not used Cover with a cap to prevent short circuit; small 4PIN interface - dedicated interface for COOLMOON brand controller (when the motherboard does not support 5V ARGB, you can purchase a for COOLMOON controller to use with it)
Wire length: 600-650mm
Light panel: AL200: 200X59X12mm, AL300: 300X41X12mm
the difference:
AL200 is more suitable for 24Pin motherboard and 3x8Pin graphics card power supply cable
AL300 is more suitable for single (6+2) Pin, dual 8Pin, and 16Pin graphics card power supply cables
Total weight: 0.23KG (including packaging)

installation method:
Installation method (1): fixed with cable ties
The flexible light board can be installed on the graphics card/motherboard power supply line by fixing it with a tie.
Installation method: 1. Insert the cable tie from one hole on the back of the transparent buckle, 2. Pass the cable tie through the other hole, buckle the cable tie to the graphics card and motherboard power supply line, then tighten the cable tie, and cut off the excess part.

Installation method (2): fixed with double-sided tape
The AL200 flexible light board can be pasted to the empty surface of the chassis using double-sided tape.
Installation method: 1. Paste the double-sided tape on the transparent buckle, 2. Tear off the protective film on the surface of the double-sided tape and then stick the flexible light board to the appropriate position on the chassis.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Package Content:
1 X ARGB LED Light Strip
4 X Double Sided Tape
1 X Instruction Manual
3 X Transparent Buckles
4 X Zip Ties