Specification:
Origin: Mainland China
Theory: Thermometer Hygrometer
Name: STC-1000 Thermometer
Model: 12V/24V/110 to 220V(Optional)
Measurement range: -50 ℃ 99 ℃
Measurement accuracy: ± 1 ℃ (-50 ℃ 70 ℃)
Resolution: 0.1 ℃
Overall power consumption: less than 3W
Sensor: NTC sensor (1 meter)
Environmental temperature: 0-60 ℃
Relative humidity: 20-85% (no condensation)
Installation hole: 71 * 29MM
Shell material: ABS flame-retardant plastic shell
Output capacity: Refrigeration (10A/250VAC/Heating (10A/250VAC)
Function:
1. Refrigeration and heating
2. Alarm
3. NTC single sensing
4. Temperature correction
Key operation instructions:
View parameter methods:
1. When the controller is working normally, press and immediately release the up key once to display the temperature setting value;
2. Press and immediately release the key once to display the temperature difference setting value. After 2 seconds, return to the normal temperature display state.
Parameter setting method:
When the controller is working normally, press and hold the \"s\" button for more than 3 seconds to enter the parameter modification mode,
2. The \"SET\" indicator light is on, and the nixie tube displays the code of the first menu item. Press the \"up\" or \"down\" keys to adjust the code of the menu item up or down,
3. Press the \"s\" key to display the parameter settings of the current menu,
4. Press and hold the \"s\" key, and then press the \"up\" or \"down\" keys to increase or decrease and display the parameter settings of the current menu,
5. Simultaneously holding down the \"s\", \"up\", or \"down\" keys can quickly adjust up or down and display the parameter settings of the current menu,
6. After setting, press and release the power button to save parameter modifications and return to the normal display state,
If there is no operation within 7.10 seconds, the parameter modification will not be saved and the normal display status will be returned.
8. If there is an error when saving parameters, it will display \"E\" and return to normal display status after 3 seconds
Fix system data:
When the machine is powered on, first check if the parameter settings are correct. If an error is detected, \"ER\" is displayed, and pressing any key at this time will restore the default.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x STC-1000 Thermometer
