Soil PH & Moisture Meter Waterproof Metal Probe Soil PH Tester for Garden Plant

Specification:
Certification: CE
Origin: Mainland China
Display Type: analog
pH range: 3-8 pH;
Moisture range: 1-8%;
pH accuracy: ±0.2pH
Moisture accuracy: ±1%
Ambient temperature: 5-50℃
Material: metal+ABS
Product body size: approximately 112.00x50.00x50.00mm (excluding probe)
Product size: 4.41x1.97x1.97inch

Instructions:
1. If the soil at the measurement point is too dry or contains too much fertilizer and it is impossible to measure the pH of the soil, you must first pour water on the measurement point and wait 28 minutes before measuring again.
2. Before using the measuring instrument, you must use an abrasive cloth to completely wipe and clean the metal absorption plate to prevent it from affecting the measured value. If the product is not new, there is protective oil on the surface of the metal plate. It must be inserted into the soil several times to remove the protective oil layer before use.
3. When measuring the pH value, insert it directly into the soil at the test point. The metal plate surface must be completely immersed in the soil. The correct value will be obtained in about 10 minutes. The density, moisture and fertilizer content of the soil may affect the measured value, so it must be measured several times at different locations to find the average value.
4. The pH value of the tester is very stable after 10 minutes. At this time, press the white button on the side and the humidity will be displayed immediately.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Package Content:
1 x Soil PH Moisture Meter